SKU: petg-red
PETG Red
from
119 SEK
/ kg · incl. VAT
In stock · Ships within 48 hours
PETG is strong, impact-resistant and slightly flexible, so it works well for functional parts. Layers bond well, and it resists moisture and chemicals. PETG is easier to print than ABS and tougher than PLA.
Diameter1,75 mmWeight1000 gFinishClassicColourRed
Available colours
Classic119 SEKTransparent+10 SEK
±0.02 mm diametertolerans, provtryckt ur batchen
Vacuum-packed with desiccant, so it is dry when you open it
Filament properties
Measured on the batch before it is released. Start at the midpoint and adjust for your printer.
PigmentedTransparent
Smooth layersVisible layers
MatteGlossy
Material
PETG
Net weight
1000 g
Diameter
1.75 mm
Nozzle temp.
220–255 °C
Bed temp.
50–70 °C
Tensile strength
53 MPa
Elongation at break
31 %
Density
1.23 g/cm³
Diameter tolerance
±0.02 mm
Downloads
These files apply to every colour in the material line.
Technical data sheetMaterial properties and recommended print settings.PDF · 201 kBDownload ↓Product safety informationSafe handling, first aid, storage and disposal.PDF · 153 kBDownload ↓RoHS certificate (SGS)Test report under EU Directive 2015/863, June 2025. No substances detected.PDF · 3.6 MBDownload ↓Print profileFilament settings for Bambu Studio and OrcaSlicer.BBSFLMT · 89 kBDownload ↓
