PrintOnion PLA Mint Green, 1.75 mm

Filament from 115 SEK/kg on your very first spool. When you buy ten of the same, from 106 SEK/kg.

173+ shades, all test-printed, so you know which black you're getting.

173+

Variants in stock

12

Materials

48 h

Ships from our warehouse

Bestsellers

What customers buy most

Se alla 172 varianter →
PETG Black
1.75 MM · 1 kg In stock

PETG Black

from 115 SEK

PLA Black
1.75 MM · 1 kg In stock

PLA Black

from 115 SEK

PETG White
1.75 MM · 1 kg In stock

PETG White

from 115 SEK

PLA White
1.75 MM · 1 kg In stock

PLA White

from 115 SEK

The full range 172 varianter i elva material From 115 SEK/kg from the very first spool. Ten of the same: 90 SEK off. Go to the shop

Material guide

What are you printing?

Choose what you want to print and you'll see which material suits it, which temperatures to start at and which spool to buy.

We recommend

PLA

From 115 SEK/kg

Easy to print and cheap per print. Sharp detail straight off the bed, no warping and 30+ colours. A good first choice for anything that stays indoors.

Nozzle

210 °C

Bed

60 °C

Enclosure

Not needed

Shop by material

Materials and prices

All filament →
3DBenchy in PLA Mint Green
PLA 30+ colours

Everyday prints, prototypes and models. The easiest material to get looking good.

From 115 SEK/kg
Water bottle in PETG Transparent
PETG 30+ colours

Tougher and water-repellent. Mounts, enclosures and parts that go outdoors.

From 115 SEK/kg
Building blocks in ABS
ABS 25+ colours

Heat-resistant and easy to post-process. Car interiors, tools, snap-fits.

From 125 SEK/kg
Sunglasses in ASA Black
ASA In stock

ABS that handles UV and weather. For parts that stay outdoors all year.

See the price in the shop
Phone case in TPU 95A
TPU 10+ colours

Flexible and abrasion-resistant. Gaskets, phone cases, wheels, dampers.

From 240 SEK/kg
Pair of gears in Nylon Black
Nylon In stock

Tough engineering plastic. Gears, hinges and moving parts under load.

See the price in the shop
Lattice ball in PEBA Green
PEBA New

Very elastic and abrasion-resistant. Springs back better than TPU. Sports gear, dampers, grips.

From 369 SEK/kg
Buckle in PCTG Blue
PCTG In stock

Tougher and clearer than PETG, with better temperature resistance.

See the price in the shop
Lamp holder in PC Black
PC In stock

Strong and heat-resistant. For parts that have to take both load and heat.

See the price in the shop
Support that dissolves in water, PVA
PVA In stock

Support material that dissolves in water, for printers with two extruders.

See the price in the shop

Watch it print

From spool to first layer

90 seconds through our warehouse in Tibro: how a spool is tested, packed and shipped before it reaches you.

Pile of 3DBenchy prints in different PLA colours

The raw material

Why we pay for expensive raw material

Cheap pellets would have meant a low price. We buy one of the most expensive instead: Luminy® LX175 from TotalEnergies Corbion, a polymer also used in medical technology and food packaging. We keep the price down by cutting out the resellers.

LX175 is odourless, with high purity and even viscosity. That gives a stable melt in the nozzle: consistent diameter, layers that bond to each other and the same result on spool number twenty as on the first.

The raw material is renewable, GMO-free and grown to the Bonsucro standard. Because we cut out the resellers, the price can still be a third of the shelf price.

Certified industrially compostable
according to EN 13432, TÜV Austria
TotalEnergies Corbion

01Grown as sugarcane

The cane binds carbon dioxide as it grows and is harvested year after year. No fossil feedstock anywhere in the chain.

02Polymerised into LX175

The sugar is fermented into lactic acid and made into high-purity pellets at TotalEnergies Corbion.

03Drawn into filament

The pellets are extruded to a ±0.02 mm tolerance, test-printed from the batch and vacuum-packed with a silica gel sachet.

The colour

We check the colours just as carefully.

Many shops just say “black” or “green” and leave you to guess which shade. We have 173+ shades and compare every colour with a test print before it goes on sale, so the colour on screen matches the spool you get.

Every shade has its own name and a short description of how it looks when printed – matte or glossy, and how visible the layers are.

Guides

Guides to materials and printing

All guides →

172 variants in stock. Ships within 48 hours.

±0.02 mm tolerance, vacuum-packed with desiccant.