PLA Filament
PLA is the most widely used 3D printing filament and the easiest one to get right from the start. We stock 88 PLA products in 32 colours, from 115 SEK per kilo for classic PLA.
10 identical products: 90 SEK offApplied automatically at checkout, no code needed.
Nothing matches the filter
Try a broader colour or another material.
Which PLA should you choose?
Classic PLA (from 115 SEK) is the first choice for figures, prototypes and everyday prints. To hide layer lines without any post-processing, go for matte PLA (from 154 SEK), while silk (from 165 SEK) gives a glossy, almost metallic finish. PLA Pro, often called PLA+ (from 164 SEK), takes more impact than standard PLA and is just as easy to print. Choose it for parts that will be used and need to survive a knock. For see-through parts there is transparent PLA (from 145 SEK), and for stiffer technical parts glass fibre (from 220 SEK) and carbon fibre (from 255 SEK). If you need to print fast, High Speed (from 165 SEK) handles up to 350 mm/s.
Specifications
Frequently asked questions about PLA
Classic PLA, from 115 SEK per kilo. It warps very little, sticks well to the print bed with standard settings and needs neither an enclosure nor any special equipment. Only switch to matte or silk once you want a different look.
With us, classic PLA costs from 115 SEK per kilo. The special variants cost more: matte from 154 SEK, silk from 165 SEK, glass fibre from 220 SEK and carbon fibre from 255 SEK. All prices are for a 1 kg spool including VAT.
PLA+ is the trade's umbrella name for PLA made tougher than standard PLA. Ours is called PLA Pro: it takes more impact than classic PLA and is just as easy to print. PLA Pro costs from 164 SEK per kilo.
PLA has a tensile strength of 63 MPa, which is high, but the material is stiff rather than tough and takes impacts less well than PETG. For parts that will be knocked about, choose PLA Pro, and for parts that must withstand heat or weather, PETG, ABS or ASA are better choices.
All our PLA is 1.75 mm with a tolerance of ± 0.02 mm, which suits the vast majority of 3D printers. The spools are vacuum-packed with desiccant.
